BYLSR - E-746 EPOXY PREPREG
- MSDS: BYLSR
- Manufacturer: FIBERCOTE INDUSTRIES INC
- Product Name: E-746 EPOXY PREPREG
- National Stock Number: 8040-00F045548
Product Identification
Product ID:E-746 EPOXY PREPREG
MSDS Date:03/19/1991
FSC:8040
NIIN:00F045548
MSDS Number: BYLSR
Responsible Party
WATERBURY, CT 06725-5000
US
Emergency Phone: 203/755-1344
Info Phone: 203/755-1344
Cage: 57929
Contractor
Telephone: 203-755-1344
Cage: 57929
Ingredients
ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: <10%
OSHA PEL 2400 MG/CUM
ACGIH TLV: 750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WOVEN FIBERGLASS FABRIC
Fraction By Weight: 50-65%
CATALYZED EPOXY MIXTURE
Fraction By Weight: 35-50%
RESIDUAL ORGANIC SOLVENTS
Fraction By Weight: <2%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MODERATE IRRITATION
&/DERMATITIS. INHALATION: NASAL &/RESPIRATORY IRRITATION.
INGESTION: GI IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, FATIGUE, WEAKNESS, CONFUSION,
EUPHORIA, DIZZINESS, HEADACHE, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING DERMAL, BRONCHIAL &
RESPIRATORY PROBLEMS.
First Aid
First Aid:EYES: FLUSH W/WATER IMMEDIATELY FOR 15 MINS. SKIN: WASH
THOROUGHLY W/MILD SOAP & WATER. INGESTION: INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:-15F
Lower Limits:2.6(ACETONE)
Upper Limits:12.8(ACETONE
Extinguishing Media:DRY CHEMICAL, WATER, FOG.
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT & SCBA.
Handling
Handling and Storage Precautions:KEEP SEALED TO AVOID ABSORPTION OF
WATER FROM HUMID AIR. KEEP AWAY FROM HEAT. STORE UNDER CONTROLLED
LOW TEMP CONDITIONS. STORE AT 0F, IF POSSIBLE.
Other Precautions:AFTER LOW TEMP STORAGE, ALLOW PACKAGE TO RETURN TO
ROOM TEMP BEFORE OPENING.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATORY PROTECTION.
Ventilation:LOCAL EXHAUST: RECOMMENDED WHEN CURING. MECHANICAL
(GENERAL): RECOMMENDED
Protective Gloves:RUBBER/VINYL/OTHER OSHA APPROVED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER WORKING & BEFORE
EATING/DRINKING.
Supplemental Safety and Health
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:NATURAL PRE-IMPREGNATED FIBERGLASS CLOTH HAVING A
MILD NON-RESIDUAL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES & OXIDIZERS.
Stability Condition to Avoid:ELEVATED TEMP, MOISTURE
Hazardous Decomposition Products:ALDEHYDES, PHENOLICS, CO, CO2, &
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:UNCONTROLLED HEAT MAY CAUSE RUN-AWAY
EXOTHERM.
Disposal
Waste Disposal Methods:DISPOSE OF IN AN APPROVED LANDFILL IAW/FEDERAL,
STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.